欢迎访问苏州丰硕自动化设备有限公司
产品中心
联系我们
    苏州丰硕自动化设备有限公司
    苏州
    电  话:
    0512-66300668/66557556
    手  机: 13912610668/13913176973
    Email: lgr720707@126.com
    地  址: 苏州市吴中区临湖镇联东路718号
       
    成都  
    手  机: 13912610668
    电  话: 028-87535191
    Email: lghbylp@163.com
    地  址: 成都市高新区天府一街1399号
       
    网  址: www.szfeeson.cn
      www.feeson.cn 
      www.szfeeson.com

  • 插件线
  • 2016-03-17 08:59:12
  • \

    插件线概述和分类
    插件线概述
      插件线又称插接线 
    插件线分类
      可分为手动插件线和链条自动插件线, 适合多规格线路板的插件工序。 
      插件线样式:单边、双边插件、转弯插件线。 
      电控方式:变频、无级调速电机、电子调速电机。 
      运行方式:可分强制和自由节。 
      侧腰结构:钢材结构、铝材结构。 
      可配选项: 气管、风扇、工艺卡架、仪表台、插座,工具箱。 
    插件线的特点和规格
    插件线的特点:
      可按客户要求定制,广泛应用于电子行业。 
      生产线插件线的组合及配置可任意变化,插件线速度可用变速旋钮调整所需输送速度,宽度可与电路板宽度随时高速,机身由铝合金构成. 
      手推插件线采用铝型材导轨作为输送介质,所以该线体摩擦力小,无噪音,也无需加任何润滑油,对所输送的印制板无任何污染。 
    插件线工程规格及参数:
      1、线体长度根据产品的装配工艺编排计算得出; 
      2、线体高度为2M,其中工作面高度可调; 
      3、线体宽度:根据产品规格自由定; 
      4、线体配置: 
      (1)日光灯 (2)电风扇 (3)工艺图板 (4)工具箱配有220V电源插座 (5)摇杆 ( 6)元件盒 
    插件线的保养
    1、机头电机的维修及保养方法:
      切不可将电机进水,也不能在电机上加柴油及液体有机化合物,因为这样肯能导致电机的绝缘损坏而出现故障。调速头的保养方法同电机。其余查考电工手册的电机保养及维护。 
    2、链条的维修及保养方法:
      链条在长期的运转后可能导致原来的润滑油发热挥发,而导致链条在运行过程中不平衡,噪声增大,爬行等。此时可打开机尾的封板,向链条加上黄油或浓一点的润滑油等。 
    3、流水线机头减速箱的维修及保养方法:
    第一次使用在三个月左右将减速箱里的机油放净,用柴油或汽油将减速箱里面清洗一下,放净后将新的润滑油加至观察窗的中间即刻。(每一个月要注意润滑是否太少)。以后每年将润滑油换一遍就可以了。润滑油太多可能引发减速箱发热,电机负荷过大导致电机保护开关跳开。润滑油太少可能引发减速箱发热,噪声增大及减速箱绞死而报废。 
     
     
    公司简介
    苏州丰硕自动化设备有限公司前身是苏州华达机电设备厂,本公司是一家专业从事液体、粉体无尘涂装设备工程和自动化输送设备工程的现代高新科技企业。公司融工程的规划﹑研发、制造﹑安装、服务、技朮整厂输出为一体,实行产品研发、生产、安装、销售、销后一条龙服务。面向用户以卓越的产品质量、完善的服务体系,最高的工作效率满足客户的需求。产品广泛应用于:汽车工业、摩托车工业、3C产业(手机、电脑、家电)、装饰建材、运动器材、木器家私、工程机械、灯饰、电子等产业。
    随著现代经济、科技的高速发展,我们时刻注重加强对国内外先进自动化技术的引进和借鉴,公司以国内知名企业为市场依托,凭藉自身的技术优势先后与多家箸名品牌企业建立了良好的合作关系。如日本松下半导体有限公司、台湾富士康集团、青岛海尔集团、苏州明基电通、德国博世汽车部件(苏州)有限公司、韩国三星电子(苏州)有限公司、苏州华硕电脑有限公司、台湾统一集团、台湾可胜科技、上海大众汽车有限公司、上海沪豪汽车部品有限公司、美国洛德机械(上海)有限公司等知名企业承接了数拾套大型涂装工程和自动化输送设备工程,并提供了优质服务及技术指导,时逢盛世丰硕愿携全体同仁将以“品质为本,缔造卓越”的原则,与国内处各企业共创商海新潮。
    专业生产:
    涂装设备:塑胶喷涂线,五金粉体,液体烤漆线,五金前处理生产线,涂装线,丝印线,水濂柜,静电除尘柜,喷漆台,UV固化炉,IR固化炉,
    烘干设备:烤箱,无尘烤箱,防爆烤箱,防氧化冲氮烤箱,隧道炉,老化房,
    输送设备:输送线,流水线,总装线,滚筒线,链板线,倍速链线,组装线,
    无尘净化设备:无尘隔间,环氧地坪,传递窗,洁净工作台,洁净棚,采样车,
    环保设备:鲜风柜,中央空调,净化柜,二次净化柜,废气处理,集尘箱,
    测试设备:恒温恒湿测试机,寿命测试机,拉力测试机,盐雾测试机,环境测试机
     
    联 系 人: 连根荣 经理 
    经营地址: 中国 江苏 苏州市吴中区临湖镇石庄工业区B1栋 
    邮  编: 215106 
    公司电话: 86 512 66300668-801 
    传  真: 86 512 66300667  
    手  机: 13912610668 
    电子邮箱: skyfeeson@yahoo.cn 
    公司主页:http://www.feeson.cn/ 



    Plug-in line overview and classification

    Plug-in line overview

    Plug-in line is also called the wiring

    Plug-in line classification

    Can be divided into manual plug-in line and line of the chain automatic plug-in, suitable for circuit board plug-in process of many specifications.

    Plug-in line style: unilateral and bilateral plug-in, plug-in line around the corner.

    Electric control methods: frequency conversion and stepless speed regulating motor, electronic speed motor.

    Operation mode: can be divided into mandatory and free verse.

    Lateral lumbar structure: steel structure, aluminum structure.

    Can match options: trachea, fan, process card, instrument desk, socket, toolbox.

    Plug-in line features and specifications

    Plug-in line features:

    Can be customized according to customer's request, which are widely used in electronic industry.

    Production line change and configuration can be arbitrary combination of plug-in line, plug-in linear velocity can be variable speed knob to adjust the required conveying speed, wide high speed with the circuit board width at any time, body made of aluminum alloy.

    Push the plug-in line adopts aluminum guide as a medium, so the line body friction small, no noise, no any lubricating oil, to deliver the PCB without any pollution.

    Plug-in line engineering specifications and parameters:

    1, the length of the line calculated according to the product assembly process choreography;

    2, line body height is 2 m, of which the working height is adjustable;

    3, line width: according to the product specification freedom;

    4, line configuration:

    (1) fluorescent lamp (2) the electric fan (3) technology board (4) toolkit is equipped with a 220 v power socket box (5) a handle (6) components

    The plug-in line maintenance

    1, head of the motor repair and maintenance methods:

    Must not the motor into the water, nor on the motor with diesel oil and liquid organic compound, because it can lead to damage of the insulation of the motor and a failure. With the motor speed head maintenance method. The rest of the tracing electrical manual motor maintenance and maintenance.

    2, the chain of repair and maintenance methods:

    Chain after running for a long time may cause the original lubricating oil heating volatilization, and cause chain imbalance in the operation process, noise increases, creep, etc. At this time, can open the tail sealing board, to the chain with butter or a bit stronger lubricating oil and so on.

    3, line head reducer of repair and maintenance methods:

    Used for the first time in about three months net, put the oil in the reducer reducer with diesel or gasoline cleaning inside, put the net after the new lubricating oil to the middle of the window immediately. (every month should pay attention to whether the lubrication too little). A year after the lubricating oil in it again. Lubricating oil too much may cause fever reducer, motor overload causes jumped protection switch. Lubricating oil could trigger a little fever reducer, increase noise reducer hanged and scrap.

     

     

     

    Company profile

    Suzhou rich automation equipment co., LTD., formerly suzhou huada electrical and mechanical equipment factory, the company is a professional engaged in liquid and powder dustless coating equipment engineering and automation equipment engineering of modern high and new technology enterprise. Company project planning, research and development, manufacture, installation, service and technology of whole factory output as a whole, the product research and development, production, installation and after sales, sales through-train service. Geared to the needs of users with excellent product quality, perfect service system, the highest efficiency to meet customer demand. Products are widely used in: automobile industry, motorcycle industry, 3 c industry (mobile phone, computer, household appliances, decorative building materials, sports equipment, wood furniture, engineering machinery, lighting, electronics and other industries.

    With the modern economy, the rapid development of science and technology, we always pay attention to the introduction of advanced automation technology at home and abroad to strengthen and guide, relying on the company with the well-known domestic enterprises for the market, with its own technical advantages successively with a number of zhu name brand enterprise established the good relations of cooperation. Like Japan panasonic semiconductor co., LTD., Taiwan foxconn group, Qingdao haier group, suzhou benq corp, Germany Bosch automotive parts (suzhou) co., LTD., South Korea's samsung electronics (suzhou) co., LTD., suzhou asustek computer group co., LTD., Taiwan, Taiwan curzon technology, co., LTD., Shanghai Volkswagen, Shanghai hao automobile components co., LTD., the United States, machinery (Shanghai) co., LTD., and other famous enterprises to undertake several ten sets of large coating engineering and automation equipment engineering, and provides the high quality service and technical guidance, age comes as substantial wish with all my colleagues will be "quality as this, to create excellence" principle, with the domestic companies to create business fashion.

    Specializing in the production of:

    Plastic spraying line, coating equipment, metal powder, liquid paint line, metal pre-treatment production line, coating line, screen printing lines, water poon cabinets, ark of electrostatic dust removal, paint spraying machine, UV curing oven, IR curing furnace,

    Drying equipment: oven, clean oven, blast oven, nitrogen oven anti-oxidation, tunnel furnace, aging room,

    Conveying equipment: conveyor line, assembly line, assembly line, drum line, chain plate line, times speed chain line, assembly line,

    Dust-free purification equipment: clean compartment, epoxy floor paint, transfer window, clean bench, clean booth, sample car,

    Environmental protection equipment: fresh wind ark, central air conditioning, cleaning tank, cleaning tank, waste gas treatment, dust collection box,

    Testing equipment: constant temperature and humidity testing machine, life testing machine, tensile testing machine, salt spray test machine, environmental test machine

     

    Touch: the roots rong manager

    Business address: China jiangsu wuzhong district suzhou city near lake town, stone village industrial zone in B1 building

    Mail editor: 215106

    The company telephone: 86 512 66300668-66300668

    The true: 86 512 66300667

    Hand machine: 13912610668

    E-mail: skyfeeson@yahoo.cn

    Website: http://www.feeson.cn/

     
上一篇   |   下一篇

在线客服

扫一扫,添加好友

在线客服